Feature:1. In the output status reminder area, you can view the output voltage, output current, output mode, etc2. With the functions of digital voltmeter and ammeter to meet your needs and give you a good experience3. Having the characteristics of small size, advanced functions, good visual effects and high accuracy4. With high operability, and can be used independently or embedded in the device to be widely used5. The main purpose is to stabilize the voltage, analog signal to digital signal, you can use the voltage regulator with confidenceSpecification:Item Type:Voltage RegulatorMaterial: ResinModel: WDPS3220Power Module Input Voltage: DC 6V-50VPower Module Output Voltage: DC 0-32VPower Output Current: 0.01A-15A Continuously Adjustable (please strengthen heat dissipation when the temperature exceeds 60, there are reserved 12v fan terminals)Display Input Voltage:6V-38VDisplay Output Voltage: 0-36V Continuously Adjustable (can only be used as a reduction voltage module, the input must be greater than the output 1V or more)Display Output Current: Adjustable, Maximum 5AOutput Power: the Maximum 480W is Recommended to Be Used within 320W, Please Reduce the Power when Using Large Pressure Difference)Operating Temperature: -10~+75 (pay attention to the temperature of the power tube when using, please strengthen the heat dissipation if it exceeds, there are reserved fan installation positions and wiring terminals)Resolution Accuracy: Voltage 0.01V, Current 0.01AConversion Efficiency: Up to 95%Short Circuit Protection: Support, Constant current currently set constant current valueInput Reverse Connection: SupportOutput Backflow: None, Please Add a Diode for ChargingWiring Mode: Terminal VI+ is the Positive Input, VO+ is the Positive OutputModule Size:Display Part: Approx. 79 x 43 x 46mm / 3.1 x 1.7 x 1.8inPower Board Part: Approx. 93 x 58 x 34mm / 3.7 x 2.3 x 1.3inHole Size: Approx. 76 x 39mm / 3.0 x 1.5inPurpose: Stabilize Voltage, Convert Analog Signal to Digital Signal.Package List:1 x Voltage Regulator1 x DisplayNote:1.Ensure that the wiring is correct2.Please power off before installation3.This model does not have MODBUS function