New!!PCI-E 1X To USB32 GEN1 USB-A+Type-C+TYPE-E Front Adapter Card Pcie To Type-C Type-E USB32 5Gbps Expansion Card _x000D_ _x000D_ _x000D_ New!!PCI-E 1X To USB3.2 GEN1 USB-A+Type-C+TYPE-E Front Adapter Card Pcie To Type-C Type-E USB3.2 5Gbps Expansion Card _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Compliant with PCI-Express specification version 2.0 _x000D_ Compliant with USB3.0 SuperSpeed specification version 1.0 _x000D_ Compliant with xHCI specification version 1.0 _x000D_ Master chip: Renesas uPD71 chipset _x000D_ The maximum transmission rate is up to 5Gbps, which is much higher than the 480Mb/s of USB2.0, up to 10 times; _x000D_ _x000D_ Backward compatible with USB2.0, USB1.1, USB1.0 _x000D_ Transmission rate: 5000/480/12/1.5Mbps _x000D_ USB power output: up to 5V 2A (increased current type) _x000D_ Support USB hot plug function _x000D_ Support WIN7/WIN8/WIN10/11/2003/LINUX and above systems. _x000D_ Hardware requirements: _x000D_ A motherboard that supports PCI-E _x000D_ This product is a desktop PCI-E expansion card. It requires an empty PCI-E slot on the motherboard to install and use. Also, make sure that the slot is not blocked by the graphics card. It cannot be installed and used on the PCI slot. Do not insert it into the PCI slot. _x000D_ PS1: Only supports PCI-E slots, cannot be inserted into PCI slots _x000D_ PS2: The large 4PIN can be used directly without plugging in electricity. Be careful not to plug it in the wrong way when plugging in the cable. It will burn things. _x000D_ Interface: USB-A*1+TYPE-C*1+TYPE-E(A-KEY)*1 _x000D_ Input interface: PCI-E 1X (compatible with 4X 8X16X) _x000D_ Interface rate: USB3.2 GEN1 5Gbps _x000D_ Installation location: PCI-E slot, does not support PCI slot _x000D_ Function introduction: Convert motherboard PCIE signal to 1 USB and 1 TYPE-C+1 TYPE-E front _x000D_ Note: The motherboard must be compatible with PCIE2.0 or above to run at high speed. It is recommended to use WIN10 or above, with a speed of 350-400M/S. _x000D_ Colour:Black _x000D_ Material:PCB+Metal _x000D_ _x000D_ Package Contents: _x000D_ 1 x PCIE X1 to USB+TYPE-C+TYPE-E Expansion Card _x000D_ _x000D_ Only the above package content, other products are not included. _x000D_ Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_