Protection of PrivacyThis anti-peeping window film has a striped pattern, it is transparent between the stripes, therefore the level of confidentiality: Semi-private window film (Protects your privacy, but not recommended for bathrooms). Block ultraviolet light to protect the health and safety of your family and prevent your household equipment from aging. Easy to install: just a few minutes. Simply clean your window and wet with soapy water and enjoy this high performance window film. (ATTENTION: A Clear Film behind the window film must be removed before installation). No adhesive &Easy removal: The rubber-free window film design reduces the release of chemicals, leaving the glass surface smooth and residue-free,can be reused. Applicable places: This window film is suitable for windows of private houses, verandas or office/office buildings, balcony, living room, bedroom, restaurant, hotel, etc. Frosted glass, cut glass and all treated glass are not suitable. Package includes: Window film x 1. Can be cut or combined, all sizes to be compatible with glass windows and wall. Tips: It is important that the protective film is removed before installation and only applied to completely smooth surfaces. 1. Clean the window thoroughly with a scraper, a squeegee and a sprayer. Then wipe the frame with paper towels. 2. Cut the film with a cutter to a size 2 to 3 cm larger than the glazing. 3. To separate the protective film, use two pieces of tape. 4. Remove the protective film by thoroughly wetting the film's adhesive with soapy water. 5. Turn the film over and apply the adhesive side to the window. 6. Spray the film to allow the squeegee to slide well. 7. Flour with the squeegee, from the center outwards. Be sure to start at the top. It is this first movement from top to bottom which will prevent the formation of air bubbles. 8. Cut the edges and clean the water left on the window.