OFFICIAL DISTRIBUTION OF XSTORM IN POLAND MODEL WITH ULTRA POWERFUL LED CHIP CSP ULTRA LED CHIP 7035 CANBUS BUILT IN A BULB !!! Two SUPER STRONG LED car bulbs designed for high beam, dipped beam and fog light The use of poppy chips CSP ULTRA LED CHIP 7035 26000LM 120W 6000K- cold white Voltage 12V / 4.3A Active Cooling - Liquid Cooling Tube CANBUS decoder BUILT IN A BULB! The materials used in the construction of the product are aluminum and COPPER The optimal structure and arrangement of the LEDs enable the required light-shadow line to be set at maximum brightness The rotating collar allows you to set the required cut-off IDEAL for lens and traditional headlamps CANBUS no bulb burned out error 2 CSP ULTRA LED CHIP 7035 chips which contain 6 light units per piece: Light color: 6000K 26000LM Extra STRONG Advantages: Greater focus of light Longer lifetime of LEDs Unprecedented power of light Greater security Canbus built into the bulb Thanks to the use of the latest technological solutions CANBUS DECODER, we have hidden the bulbs inside! Thanks to the use of COPPER in the LED core, the specification of heat conduction will begin to improve, hence the service life , as well as there is no change in the color of the light after prolonged use - no burnout effect. Cooling system - Liquid Cooling Tube Thermal conductivity of copper 370–400 W / (m K) Longer service life No color change No burnout effect Powers of light for years Thanks to the use of the latest technological solutions, the CANBUS decoder was hidden inside the bulb. This allowed for space saving and no complications during assembly. The advanced CANBUS decoder means that the error of a burnt bulb is not displayed, as with ordinary LED bulbs. It allows you to enjoy strong and bright light without interference and noise from the FM RADIO and CB RADIO . No flashes when ignition is turned on. No bulb burnt error No noise or interference from the FM RADIO No noise or interference from the CB RADIO No flickering or flashes Canbus works in about 99% of cars Installation Guide: Remove the bulb cover. Unplug the bulb. Remove the bulb. Remove the LED bulb collar. Install the flange in the headlamp socket. Place the bulb in the collar of the base. Turn to lock the bulb in the collar. The bulb can be adjusted to different positions relative to the cap for the best effect. Connect the LED to the power supply. Close the bulb cover.