PNEUMATIC HEAD WASHING BOWL WITH SHOWER RF-961 The offer is for 1 pc. head washing bowls with shower RF-961. Specialized medical device It allows the caregiver to wash the head of a person in a lying position, protecting the patient and the environment from spilling water The set includes a shower for rinsing the head (with a stiffening tube and a string for hanging) Made of vinyl Air pumped It has a special cutout for the neck A drain pipe is installed on the bottom Easy to store - after use, you can deflate, then the bowl takes up very little space A repair kit consisting of two patches and glue is included Dimensions: 53 X 61 X 20 cm Weight: 0.830 Kg Capacity: 10l Directions for use: 1. Inflate the bowl using your mouth or pump. 2. Place the bowl's drain hose in a vessel that will collect the water. The dish should be below the level of the bowl so that the water can drain freely. 3. Place the bowl (basin) under the patient's head so that his neck is in the recess of the bowl. 4. Insert the stiffening tube into the top of the water tank and thread a string through it so that you can hang the shower. Fill the shower with warm water, then hang it above the level of the bowl. In order for water to flow from the shower, turn the valve. 5. After washing the patient's head, unlock the bleed valve in the basin so that water can flow out through the drain hose into the basin. 6. When the water drains, remove the bowl from under the patient's head by placing a towel in its place. Dry the patient's head. 7. Pour the remaining water out of the bowl and then wipe it dry.