<p>1. new and high quality.</p> <p>2. It is convenient to use.</p> <p>3. Portable design, light weight.</p> <p>4. Safely connect it to your 2.5\/3.5inch sas hdd devices.</p> <p>Input Interface: SATA 22PIN (7+15PIN)</p> <p>Output Interface: SAS 29PIN</p> <p>Speed: 6Gbps</p> <p>Support System: WIN7,WIN10,WIN11, Linux OS</p> <p>Kind Tips:</p> <p>Only support 2.5\/3.5inch SAS HDD SSD, NOT Support U.2 SSD.</p> <p>If the disk is not recognized, try another SATA interface.</p> <p>Installation steps:</p> <p>1. Turn off the computer and disconnect the power cord.</p> <p>2. Open the computer case and find the SATA 7PIN slot and SATA15PIN power cable that can be used.</p> <p>3. Gently insert the adapter card into the SAS hard drive and make sure it is firmly fixed in the hard drive position of the chassis.</p> <p>4. Insert the SATA cable and the SATA hard drive power cable into the adapter card, and insert the other end of the SATA data cable into the motherboard SATA port.</p> <p>5. Re-close the computer case and reconnect the 220V power cord.</p> <p>6. Start the computer and check whether the newly added SATA device is successfully recognized in the .</p> <p>Colour:Black</p> <p>Material:PCB+Plastic</p> <p>Package Contents:</p> <p>1 x SATA to SAS HDD Expansion Card</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>