Feature:1. ENERGY EFFICIENT: The battery has a maximum conversion efficiency of 94.7%, standby power as low as 5W, high accuracy control to ensure maximum PV utilization, and support for 1.1 times long term overload.2. STRONG FUNCTIONS: When the utility power is abnormal, the inverter will automatically switch to off grid, the switching time is less than 10ms, and the power will never be cut off.3. STABLE PERFORMANCE: The inverter has strong output overload capacity to meet different loads and has multiple communication interfaces such as RS485, CAN, WiFi.4. EASY OPERATION: Inverter with multi mode can be selected, easy to set, support remote online upgrade, simple maintenance, and highly integrated system.5. SAFE TO USE: The IP65 protection level ensures that the inverter can operate reliably for a long time and the system is safer.6. FULL PROTECTION: The inverter has various protections, such as output short circuit protection, leakage protection and DC undervoltage protection.Specification:Item Type: Off Grid Grid Connected InverterMaterial: Aluminum alloyPV Output:Maximum Input Power: 6000W Rated Input Power: 5000W Maximum Input Voltage: 580V MPPT Voltage Range: 125V-550VStart Up Voltage: 150VMPPT Efficiency: >99.9%Number of MPPT Channels: 2Number of DC Input Channels: 2Battery: Battery Type: Lithium etc.Input Voltage: Input Voltage 48V(40-72V)Rated Charge Discharge Power: 4600WMaximum Charge Discharge Current: 100AVoltage and Current Protection: YesTerminal Type: Screw crimp terminalElectrical Isolation: High frequency isolationGrid Connected Operation: Rated Output Power: 5000VARated Output Voltage Frequency: 220V230V180V-270VAC, 50, 60Hz 45-55Hz, 55-65HzRated Input Output Current: 24APower Factor: 0.99, (0.8 over - 0.8 lag adjustable)Grid Type: Single PhaseCurrent Distortion Rate: <3% (full load)Off Grid Operation: Rated Output Voltage: 230Vac2%Output Frequency: 50Hz(60Hz)0.2%Voltage Distortion Rate: <3%Overload Capacity: 5 second at>150%, 10 second at 110%-150%Efficiency: Maximum Efficiency: 97.60%European Efficiency: 97.30%Standby Power Consumption: <5WMPPT Efficiency: >99.9%Certificates and Standards: Grid Connected Standards: VDE-AR-N 4105,VDE0126-1-1,G83/2,G59/3,AS4777.2/.3Safety Regulation: IEC62109-1 and -2,IEC62477-1,IEC62040.1.1,IEC62116Electromagnetic Compatibility: EN61000-6-1/2/3/4Protection: Earth Leakage Protection: IntegratedOutput Short Circuit Protection: IntegratedDC Undervoltage Protection: IntegratedAC Undervoltage Protection: IntegratedPeak Hour Setting: IntegratedIslanding Protection: IntegratedInsulation Impedance Detection: IntegratedDC Switching: IntegratedGeneral Parameters:Installation Method: Wall mountedAmbient Temperature Range: -25-60Relative Humidity Range: 0-95%Working Altitude: <3000mNoise: <25dBCooling Method: Natural coolingProtection Level: IP65Communication Interface: WiFi, RS485, CANDisplay: LCD and APPSize (W x H x D): Approx. 595 x 539 x 205mm / 23.4 x 21.2 x 8.1in.Package List:1 x Inverter1 x Backplane2 x Photovoltaic Positive Terminal2 x PV Negative Terminal1 x Photovoltaic Antenna4 x Expansion Screw9 x Terminal3 x Connector8 x Screw4 x Photovoltaic Terminal Accessory4 x Other Accessory1 x Instruction ManualNote:1. The inverter must be installed and maintained by a professional in accordance with local standards and regulations.2. The DC input and AC grid must be disconnected from the inverter before installation and maintenance, and the inverter must not be touched for at least 5 minutes after disconnection to prevent electric shock.Do not touch the inverter for at least 5 minutes after disconnection to prevent electric shock.3. The local temperature of the inverter may exceed 60 when it is operating, please do not touch it to avoid burns.4. Please install it in a place out of the reach of children.5. Appropriate anti‑static measures should be taken.6. Make sure the DC input voltage is less than the maximum input voltage of the inverter, otherwise the inverter will be damaged.7. The PV string will generate high voltage DC when exposed to the sun, and it needs to be operated in accordance with the manual, otherwise it may cause part of the protection measures to fail, which may threaten personal safety.8. To ensure the inverter is completely powered off, you need to turn off the DC switch (optional), disconnect the PV terminal, disconnect the battery and disconnect the AC terminal.9. When the inverter is working, it is forbidden to plug and unplug the PV, battery and AC connectors.