19,07 €
la livraison GRATUITE

MicroPython Pyboard v1.1

  • Marque: Unbranded
Prix de vente conseillé : 25,17 €
Prix : 19,07 €
Vous économisez : 6,10 € (24%)
Verkocht door:
19,07 €
la livraison GRATUITE

Seulement 1 disponible(s)

Nous acceptons les modes de paiement suivants

Description

Description: The pyboard v1.1 is a compact and powerful electronics development board that runs MicroPython. It connects to your PC over USB, giving you a USB flash drive to save your Python scripts, and a serial Python prompt (a REPL) for instant programming. Requires a micro USB cable. MicroPython is a complete re-write of the Python (version 3.4) programming language so that it fits and runs on a microcontroller. It includes many optimisations so that it runs efficiently and uses very little RAM. MicroPython runs bare-metal on the pyboard, and essentially gives you a Python operating system. The built-in pyb module contains functions and classes to control the peripherals available on the board, such as UART, I2C, SPI, ADC and DAC. Differences between PYBv1.0 and PYBv1.1: high-speed crystal changed from 8MHz to 12MHz; LDO changed from MCP1802 to MCP1703; USB VBUS power diode replaced with silicon diode; JST battery connector pads added with protection FET. Specification: STM32F405RG microcontroller 168 MHz Cortex CPU with hardware floating point 1024KiB flash ROM and 192KiB RAM Micro USB connector for power and serial communication Micro SD card slot, supporting standard and high capacity SD cards 3-axis accelerometer (MMA7660) Real time clock with optional battery backup 24 GPIO on left and right edges and 5 GPIO on bottom row, plus LED and switch GPIO available on bottom row 3x 12-bit analog to digital converters, available on 16 pins, 4 with analog ground shielding 2x 12-bit digital to analog (DAC) converters, available on pins X5 and X6 4 LEDs (red, green, yellow and blue) 1 reset and 1 user switch On-board 3.3V LDO voltage regulator, capable of supplying up to 250mA, input voltage range 3.6V to 16V DFU bootloader in ROM for easy upgrading of firmware The two mounting tabs on the pyboard have perforations so that you can snap them off cleanly if needed Package Includes: 1 Piece MicroPython Pyboard v1.1 Powerful Electronics Development Board Note: The color of the USB Cable is sent in random (White or black)
  • Identifiant Fruugo: 346005622-756961780
  • EAN: 6902615519288

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité:
  • KEEP OUT OF REACH OF SMALL CHILDREN.
  • TO BE USED UNDER THE DIRECT SUPERVISION OF AN ADULT.

Livraison & retours

Expédition dans les 24 heures

  • STANDARD: GRATUIT - Livraison entre lun. 06 octobre 2025–ven. 10 octobre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Shenzhen Aixuan Keji Youxian Gongsi
  • Shenzhen Aixuan Keji Youxian Gongsi
  • shenzhenshi futianqu yuanlingjiedao hualinshequ baguasilu61hao bagualinggongyequ 430dong401-7M
  • Shenzhen
  • CN
  • 518000
  • Aisuers1@suntekstore.us
  • 19129904825
  • https://www.uk/search/?merchantId=26961

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • eVatmaster Consulting GmbH
  • eVatmaster Consulting GmbH
  • Bettinastr.30, 60325
  • Frankfurt am Main
  • DE
  • 60325
  • contact@evatmaster.com
  • 496995179070
  • https://www.evatmaster.com/