Feature:1. Perfect for high volume repair work on trucks and other heavy machinery.2. A huge loose power of up to 2200 Nm and saves air consumption relatively economically.3. Extended anvil, integrated switch, 3-level impact force adjustment for tightening, full of force when loosening.4. Pneumatic tools can change air for power, environmental protection and health.5. Made of heavy materials, with an ergonomic soft grip and a removable side handle, it provides comfort even after long periods of use.Specification:Item Type: Air Impact WrenchBrand: KOPOModel: KP-549Type: Air WrenchSquare Head Size: 1 (inch)Bolts Specification: Approx. 41mm / 1.6inAverage Air Consumption: 0.5M3 / MinWorking Pressure: 0.62-1.0 (Mpa)No-load Speed: 4200 (rpm)Drive Rod Size: Approx. 25mm / 1inAir Inlet Size: 1/2 (inch)Maximum Torsion: 2200 (n.m)Working Pressure: 8-12KG / CMAir Inlet Connector: 1/2 inchInlet Diameter: Approx. 13mm / 0.5inBolts Capacity: 41MM.Package List:1 x Air Wrench1 x Handle1 x Air Inlet1 x Hex Wrench4 x Screw4 x Screw Washer1 x English ManualNote:1. Pneumatic tools are lubricated with spindle oil and sewing machine oil (automotive lubricant). Do not use engine oil or recycled oil. Doing so may damage internal parts.2. During operation, please use this tool at 8-12KG / cm. Low voltage cannot make use of the performance of the tool. High air pressure can quickly shorten the life of the tool.3. In order to make the machine operate normally, please install filter regulator and oiler in the air compressor mountain pass.4. If there is no oiler, please fill the specified oiling port before and after use ensures the machine is lubricated.5. Regularly check whether there is sewage and impurities in the filtering device. If so, drain the sewage in time (usually one week).6. Inspect the air hoses and joints for leaks and looseness to prevent compressed air from entering the pneumatic tools.7. Check whether the air tool itself and air tool accessories are out to scratch the white head to prevent high-speed damage to the tool or injury to personnel.8. Do not use non-pneumatic tool accessories on pneumatic tools.9. If the machine does not rotate or rotates steadily, add a large amount of spindle oil or sewing machine oil, then turn on the machine to rotate and clean the dirt and obstacles two or three times. The machine is still troubleshooting, please contact a professional.