Feature: 1. Real-time display of the current measured torsion value and speed value, you can directly calculate the current power value 2. Support RS485 communication, support active upload protocol, communication rate up to 500 times per second 3. This sensor supports simultaneous output of transmission current and transmission voltage 4. The sensor comes with OLED display, the resolution is 128 x 64 5. Can carry out simple calibration, clearing, filtering and other operations, allowing the sensor to be overloaded by 200% 6. The accuracy achieves accuracy of 1/1000 or more, with excellent 0-point stability 7. Non-contact, no maintenance, no wearing parts and no life limit Specification: Item Type: Dynamic Torsion SensorRated Capacity: ± 10N.m Power Input: DC24V Current Consumption: Below 150mA Torsion Output: ± 5VDC; 0-10V; 4-20mA Speed Output: 60 pulses / rev Response Performance: 1kHz Load Resistance: 2kΩ or more Signal Delay: 0.6ms (50% response) Allow Overload: 200% FS Operating Temperature Range: -10 ~ + 50℃ Non-Linearity: 0.1% FS Repeatability: 0.03% FS Lag: 0.03% Temperature Effect of 0 Point: 0.01% FS/C Temperature Effect of Output: 0.01% FS/C Rated Speed: 10000rpm The Fastest Rotation Speed: 15000rpm Maximum Twisted Angle: 2.60x10rad (0.149°) Moment of Inertia: 0.38kgcm Vibration Natural Frequency (rotor Part): 19.4kHz Torsion Constant: 3.85 × 10Nm / rad. Package List: 1 x Sensor1 x Cable