Car UPA USB Programmer Tool V1.3 with Adapter for 2014 Version MA Diagnostic Use

48,95 €
la livraison GRATUITE

Car UPA USB Programmer Tool V1.3 with Adapter for 2014 Version MA Diagnostic Use

  • Marque: Unbranded

Car UPA USB Programmer Tool V1.3 with Adapter for 2014 Version MA Diagnostic Use

  • Marque: Unbranded
Prix : 48,95 €
Verkocht door:
48,95 €
la livraison GRATUITE

En stock

Nous acceptons les modes de paiement suivants

Description

Simply connect the motherboard of the UPA programmer directly or using a DB9 male or female extension cable (1: 1) Insert the correct configuration key into the slot on the main board and start programming via ZIF or DIP female ! You can also use the included DIL to 10 flat ribbon pins, place it inside the ZIF plug and connect a clip or clamps for the use of ISP from there. For MCU. Choose the adapter you want to use, connect the flat cable for the adapter (PIN1 is always indicated on both the cable and the adapter) and also on the 10-pin ISP connector on the main board. Select the VCC supply source via on the main board next to the ISP connector (on = target upa supply ... off = target has its own supply). Slide the adapter over the soldered PLCC MCU on the target PCB. (No welding, no pinout revision, no pin counting, saves a lot of time and problems and allows your work to be faster, more accurate and easier). Once your workshop is equipped with our set of adapters, you have a new UPA experience. 1. Language: English. 2. Hardware Version: V2014 3. Software Vesion: V1.3 4. Support Function, but Has No Adapter in the Package for : ST62-40 or 45 or 49 NSC:CR16-HCS5(9) or MCS5(9) or MES5(9) or MFS5(9) or MCT5(9) or HCT5(9) for : PIC12F-508 or 509 or 629 or 675,PIC16F-627(A) or 628(A) or 648A or 72 or 73 or 74 or 76 or 77 or 818 or 819 or 83 or 84(A) or 870 or 871 or 872 or 873(A) or 874(A) or 876(A) or 877(A) for : MC68HC05-B6 or B8 or B16 or B16 or B32 or E6 or E6 or H12 or L28 or P3 or P3x or X16 or X32 MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A, MC68HC11 or A1 or A8 or E9 or EA9, MC68HC11-E20 or F1 or K4 or KA2 or KA4 or KG4 or KS2 or KS8 or L6 or P2 or PA8 or PH8 MC68HC912-B32 or BE32 or D60 or D60A or DC128A or DG128 or DG128A, MC9S12-D64 or A128 or DG128 or DG256 or H128 or H256 for 8051 Architecture: AT89S-51 or 52 or 53 or 8252 or 8253 Colour:As Shown Material:plastic Package Contents: 1 x UPA programmer 1 x UPA-USB cable 1 x Mainboard with 40pin DIL ZIF (600mil) socket and 14pin SOIC ZIF (150mil) socket 1 x CD Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.
  • Identifiant Fruugo: 413305273-873442274
  • EAN: 9643901768757

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre mer. 08 octobre 2025–mer. 15 octobre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Hefei Yingaonan Trading Co., Ltd.
  • Hefei Yingaonan Trading Co., Ltd.
  • Room 503, Building 1, Jiaxing Garden, No. 9 Jiashan Road, Jiashan Road Sub-district, Yaohai District, Hefei City, Anhui Province
  • Hefei
  • CN
  • 230011
  • ashburbu@163.com
  • 19162050305

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • In Memoria Futuri SAS
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901