6bit WIFI Clock W Second 12Inch Wireless Network Timing Electronic Clock LED Digital Display TIME TMEP Alarm Clock USB Powered 1. The new model has changed the network distribution mode by generating wifi hotspot and network address, address: 192.168.4.1 Electrical Parameters Power Supply: TYPE-C USB 5V (power ports on the back or right side). Operating Current: 150mA Product Overview WiFi-enabled home clock with second display . Automatically calibrates time when connected to WiFi. Stays seamlessly accurate when continuously connected. Features: Auto-brightness adjustment based on ambient light (gentle on eyes at night). Displays time, date, and temperature . Supports 3 customizable alarms . Built-in backup battery retains time settings during power outages. Setting Key In normal display mode: Press to enter Time/Date/Year setup. Minutes will blink first Adjust with +/- keys. Press again Hours blink Adjust. Repeat for Day Month Year . Press once more to save and exit . Plus Key Cycles through display modes in normal mode: [Time] [Date] [Temperature] [Alternating Cycle] . Note: Customize displayed items in cycle mode via "dd" parameter. Adjust cycle interval via "dF" parameter (see "Minus Key" section). Minus Key In normal mode: Press to enter parameter settings . Use Plus Key to adjust values. Refer to the table below for parameter codes: Parameter Descriptions Co DE Function AC Temperature calibration (-5 to +5C). Example: If displayed temp is 1C too high, set AC:-1 . Note: Keep AC:0 if no reference thermometer. DD Cycle display items : [0: Time+Date+Temp] , [1: Time+Temp] , [2: Time+Date] . DF Cycle interval (1-9 seconds). Example: DF:3 = 3-second intervals. LL Brightness level (1-9, 1=dim, 9=max). Note: Manual brightness works only if AL:0 . AL Auto-brightness : 0=Off , 1=On (auto-adjusts based on ambient light). BP Alarm sound : 0=Off , 1=On . Tip: Press any key to mute a ringing alarm. FF Time format : 12=12-hour , 24=24-hour . Press Minus Key once to save and exit. Alarm Setup Press Alarm Key in normal mode. Use Plus Key to cycle through 3 alarm groups (marked 1/2/3 on the right). Adjust time for each group. Tip: Set all 3 alarms to the same time for a single daily alarm. _x000D_